Crusher A sand-making equipment that was born in the last century and is still widely used today. It is often used in the sand production line process and is an indispensable sand making equipment in the sand production line.
In the process of crushing materials, the crusher equipment also has a certain loss to the equipment itself. Especially when the selected equipment does not match the material to be processed, the loss caused to the crushing equipment will be greater. Therefore, in order to reduce the loss of the crusher equipment, increase the production efficiency and reduce the use cost, it is necessary to select more suitable equipment according to the pressure resistance, wear resistance and humidity of different materials. Still very advantageous
The crusher is a must-have model in the sand production line. The material that comes out can be used directly as sandstone! Simply talk about the advantages of the crusher in the sand production line.
1. Breaking is performed using the impact principle. The fragile surface of the meteorite price, layer clothing and other fragile surfaces are broken, and the effect is high, the consumption is small, the output is large, the product pull is even, and the crushing is less;
2, the crushing ratio is large. For example, compared to a hammer crusher. Hammer crusher is generally i -10-15, higher up to! ir. The crusher of the impact crusher is larger than 150, so the number of broken segments can be reduced, simplifying the production process. Reduce one 7kIs investment;
3, the structure of the machine is simple and easy to process. Therefore, it is easy to manufacture, low cost, and easy to operate and maintain;
4. It has the characteristics of selective crushing, that is, the ore with a large specific gravity, the small pull of the crushed rock and the small specific gravity. The crushing degree is large, the equipment is light, and there is no obvious unbalanced vibration.
The larger feature is that the bell is more polished. The broken meteorite is harder. The faster the foot hurts, the more troublesome the work of replacing the hammer. Therefore, it is not suitable for crushing hard vermiculite. When the water content in the ore is more than 9%, it is easy to cause the surface of the counter-attack plate to be easily drilled and reduce the crushing space. The crusher is in the sand production line to reduce productivity, sometimes It can cause equipment accidents.
